This page require scipts to be enable in browser settings to appear correctlyElectrical Accessories with spring connector

Spring Contact Terminal (Screw less) for Electrical Accessories

 Fast and easy connection and assembly of electrical accessories 
 Patent application no. -  3165/MUM/2010 
 The accessories have terminals with spring comprising of a base connector fixed to the body and a connector that moves along vertical axis of base connector. The connectors have perpendicular holes to insert wire. A spring between two connectors pushes connectors away from each other creating pressure to hold the wire inserted in the horizontal holes

The moving connector is pressed so the perpendicular holes on both connectors are aligned and form a co-axial hole. Wire is inserted in the hole and connector is released. The spring pushes moving connector apart and wire is clamped between holes.

The moving connector has an insulating cap on top to allow the using terminal in live circuit.

This terminal needs less time to connect and also reduces possibility of loose connection of wires

When the shaft is set in motion, the two plates are pulled apart from each other due to centrifugal governors.
 Invention (What is New) 
 The connection type used in electrical accessories is normally screwing type connectors. These require more time and effort for assembly of electrical circuits and boards. The accessories with spring connectors show require less time and effort to connect and assemble the electrical circuit boards 
 Diagram & Description 
 The spring connectors are easy to connect wire. Press the connector cap (8), insert wire (7) and release cap. 
Socket with Spring Connector                  Spring Connector
 Shown below are few versions on different accessories  
Spring Contact TerminalSpring Contact Terminal
Inside View, Cut View, Views from two sides with wire inserted
Switch with Spring Contact
Switch with Spring Contact
Switch with Spring Contact Terminals
Switch With Springed connector
Switch with Spring Contact Terminals
These terminals should be useful on electrical accessories as it would take less time to connect / disconnect the wires